Your wooden floor will never look impressive unless you take proper care of your floor. You need to go for sanding and polishing after a few years to offer a facelift to your floor.
689 Pty Ltd is the experienced flooring contractor in Gold Coast that can provide you right kind of tradies who can do a quality sanding job. If you are looking for any such local company who can offer you a similar kind of services then you can read further.
To search for the right Gold Coast flooring installation company you can follow these important tips:
- Search on the internet
If you search on the internet then you can come across many companies in Australia who will be ready to offer you sanding services. You can also check their online review and shortlist a few companies who are operating in the nearby areas and ask them to send their offer.
- Check the knowledge and experience of the company
You may start interviewing them one by one and try to know what kind of knowledge and experiences do these companies have? You must also ask timber floor sanding and polishing contractor where they have provided sanding services and also get a few references from their past clients.
- Also, inquire about the price
You can also check their prices and make sure that their prices are as per the market rate. Don’t consider if any company is offering an unbelievably low price unless you are very confident about the company.
How should get your sanding done?
- Prepare the area
To start with, check for any cracks or gaps and fix if any nails are poking up. Sweep the complete floor properly before the sanding operation starts. Keep the doors closed so that dust generated due to sanding may not get spread all over. However, ventilation must be provided.
- Setting up the sander
Suitable sandpaper must be fitted to the sander’s drum and make sure that it is tightly fitted to the drum. To avoid unintentional sanding before starting up the motor, make sure the sander’s drum is levered or elevated off the floor.
- Sanding
Move your sander in the direction along the grain and sand one row at a single time. Do it slowly so that the sanding operation is consistent. After finishing one row come to the starting point of the next row. While changing the sandpaper you must switch off the sander.
- Sealing
After the sanding, apply varnish to lockin the finish for protecting your floors against any wear and tear. When the sanding dust is fully settled thereafter vacuum the area. Varnish coating may be given at least 2 coats. During the sanding process always wear a mask
Authors Bio
Alex is the author of this blog. Guest posting, web building, social media marketing, copywriting, and internet marketing are just a few of the services they provide. They’ve made a name for themselves by consistently producing exceptional results for their clients. Visit their website, BusyFox.com.au, to learn more about them.